Able Seamen Description OES Code: 97514 Stand watch at bow or on wing of bridge to look for obstructions in path of vessel. Measure water depth. Turn wheel on bridge or use emergency equipment as directed by Mate. Break out, rig, overhaul, and store cargo-handling gear, stationary rigging, and running gear. Chip rust from and paint deck or ship's structure. Must hold government-issued certification. Must hold Tankerman certification when working aboard liquid-carrying vessels. Earnings Water transportation workers who usually worked full time had median weekly earnings of $579 in 1996. The middle 50 percent earned between $402 and $860 a week. The lowest 10 percent earned less than $287, while the highest 10 percent earned more than $1,157 a week. Captains and mates had median weekly earnings of $653 a week in 1996. The middle 50 percent earned between $394 and $904 a week. The lowest paid 10 percent earned less than $275, while the highest more than $1,203 a week. Seamen had median weekly earnings of $520 a week in 1996. The middle 50 percent earned between $395 and $695 a week. The lowest 10 percent earned less than $288 a week, while the highest 10 percent earned more than $983 a week. Hours & Benefits At sea, these workers usually stand watch for 4 hours and are off for 8 hours, 7 days a week. Those employed on Great Lakes ships work 60 days and have 30 days off, but do not work in the winter when the lakes are frozen. Workers on rivers, canals, and in harbors are more likely to have year-round work. Some work 8- or 12-hour shifts and go home every day. Others work steadily for a week or month and then have an extended period off. When working, they are usually on duty for 6 or 12 hours and are off for 6 or 12 hours. Merchant mariners spend extended periods at sea, and earn leaves. Most are hired for one or more voyages that last for several months, although there is no job security after that voyage. Merchant marine officers and seamen, both experienced and beginners, are hired for voyages through union hiring halls or directly by shipping companies. These hiring halls prioritize the candidates by the length of time the person has been out of work, and fill open slots accordingly. Hiring halls are typically found in major sea ports. Employment Trends Employment 1996 700 Projected Employment 2006 720 Growth Rate 1996-2006 2.9% Openings due to Separations 270 Employment Trends by California County National employment Trends About 40 percent of all water transportation workers were employed on board merchant marine ships or U.S. Navy Military Sealift ships operating on the oceans or Great Lakes. Another 40 percent were employed in transportation services, working on tugs, towboats, ferries, dredges, and other watercraft in harbors, on rivers and canals, and other waterways. Others worked in water transportation services such as piloting vessels in and out of harbors, operating lighters and chartered boats, and in marine construction, salvaging, and surveying. The remaining water transportation workers were employed on vessels that carry passengers, such as cruise ships, casino boats, sightseeing and excursion boats, and ferries. Keen competition is expected to continue for jobs in water transportation occupations. Overall, employment in water transportation occupations is projected to decline through the year 2006. Opportunities will vary by sector. Employment in deep sea shipping is expected to continue its long-term sharp decline as U.S.-staffed ships carry an even smaller proportion of international cargo. Stringent Federal regulations require larger crews on U.S.-flagged ships, which allow vessels that fly foreign flags—and have smaller crew sizes—to operate at lower cost and make a larger profit. A fleet of deep sea U.S.-flagged ships is considered to be vital to the Nation's defense, so some receive Federal support through a maritime security subsidy and other provisions in laws limit certain Federal cargoes to ships that fly the U.S. flag. Newer ships are designed to be operated safely by much smaller crews. Innovations include automated controls and computerized monitoring systems in navigation, engine control, watchkeeping, ship management, and cargo handling. As older vessels are replaced, crew responsibilities will change. Seamen will need to learn new skills to be able to handle these varied duties. Vessels on rivers and canals and on the Great Lakes carry mostly bulk products such as coal, iron ore, petroleum, sand and gravel, grain, and chemicals. Shipments of these products are expected to grow through the year 2006, but productivity increases should cause employment to decline. Employment in water transportation services is likely to show little or no change. The decline in new opportunities has created competition for existing jobs, with many experienced merchant mariners going for long periods without work. As a result, unions generally accept few new members. Also, many merchant marine academy graduates have not found licensed shipboard jobs in the U.S. merchant marine, although most do find industry related jobs. Most are commissioned as ensigns in the U.S. Naval Reserve, and some may be selected for active duty in the Navy. Some find jobs as seamen on U.S. flagged or foreign-flagged vessels, tugboats, other watercraft, or civilian jobs with the U.S. Navy. Some take land-based jobs with shipping companies, marine insurance companies, manufacturers of boilers or related machinery, or other related jobs. Unless the number of people seeking merchant marine jobs declines sharply, the present intense competition is likely to continue. Advancement For employment in the merchant marine as an unlicensed seaman, a merchant mariner's document is needed. Applicants for merchant marine documents do not need to be U.S. citizens, but must be a registered alien. A medical certificate of excellent health, and a certificate attesting to vision, color perception, and general physical condition may be required for higher-level deckhands. While no experience or formal schooling is required, training at a union-operated school is the best source. Beginners are classified as ordinary seaman and may be assigned to the deck or engineering department. With experience at sea, and perhaps union-sponsored training, an ordinary seaman can pass the able seaman exam and move up with 3 years of service. No special training or experience is needed to become a seaman or deckhand on vessels operating in harbors or on rivers or other waterways. Newly hired workers are generally given a short introductory course and then learn skills on the job. With experience, they are eligible to take a Coast Guard exam to qualify as a mate, pilot, or captain. Substantial knowledge gained through experience, courses taught at approved schools, and independent study are needed to pass the exam. Harbor pilot training is usually an extended apprenticeship with a towing company or a pilot association. Entrants may be able seamen or licensed officers.     Note: Information for this occupation is limited. Unless indicated otherwise, the data presented here is based on the related occupation "Water Transportation Occupations" from the National Occupational Outlook Handbook. For current job listings, browse CalJOBS or America's Job Bank.

Click arrow at bottom left of image to begin. Requires QuickTime Education and Training Entry, training, and educational requirements for most water transportation occupations are established and regulated by the U.S. Coast Guard, part of the U.S. Department of Transportation. All officers and operators of watercraft must be licensed by the U.S. Coast Guard, which offers various different licenses, depending on the position and type of craft. To qualify for a deck or engineering officers license, applicants must have graduated from the U.S. Merchant Marine Academy, or one of the six State academies, and pass a written examination. Federal regulations also require an applicant pass a physical examination and a drug screening before being considered. For example, persons without formal training can be licensed if they pass the written exam and posses at least 3 years of appropriate sea experience. However, it is difficult to pass the examination without substantial formal schooling or independent study. Also, because seamen may work 6 months a year or less, it can take 5 to 8 years to accumulate the necessary experience. The academies offer a 4-year academic program leading to a bachelor of science degree, a license as a third mate (deck officer) or third assistant engineer (engineering officer) issued by the U.S. Coast Guard, and a commission as ensign in the U.S. Naval or Coast Guard Reserve. With experience and passing of additional exams, third officers may qualify for higher rank. Because of keen competition, however, officers may have to take jobs below the grade for which they are licensed. Skills & Other Requirements Movement of huge amounts of cargo, as well as passengers, between nations and within our nation depends on workers in water transportation occupations. They operate and maintain deep sea merchant ships, tugboats, towboats, ferries, dredges, excursion vessels, and other waterborne craft on the oceans, the Great Lakes, in harbors, on rivers and canals, and on other waterways. Captains or masters are in overall command of the operation of a vessel and they supervise the work of any other officers and crew. They determine the course and speed, maneuver to avoid hazards, and continuously monitor the vessels position using charts and navigation aides. They either direct or oversee crew members who steer the vessel, determine its location, operate engines, communicate to other vessels, perform maintenance, handle lines, or operate vessel equipment. Captains and their department heads insure that proper procedures and safety practices are followed, check that machinery and equipment are in good working order, and oversee the loading and unloading of cargo or passengers. They also maintain logs and other records tracking the ships' movements and cargo/passenger carrying history. Deck officers or mates perform the work for captains on vessels when they are on duty. Mates also supervise and coordinate activities for the crew aboard the ship. They inspect the cargo holds during loading to ensure the load is stowed according to specifications. Mates supervise crew members engaged in maintenance and the primary up-keep of the vessel. All mates stand watch for specified periods, usually 4 hours on and 8 hours off. However, on smaller vessels, there may be only one mate (called a pilot on some inland vessels) who alternates watches with the captain. The mate would assume command of the ship if the captain becomes incapacitated. When more than one mate is necessary aboard a ship, they are typically designated Chief Mate or First Mate, Second Mate, and Third Mate. Engineers or marine engineers operate, maintain, and repair propulsion engines, boilers, generators, pumps, and other machinery. Merchant marine vessels usually have four engineering officers: A chief engineer, and a first, second, and third assistant engineer. Assistant engineers stand periodic watches, overseeing the safe operation of engines and machinery. Seamen, also called deckhands, particularly on inland waters, operate the vessel and its deck equipment under the direction of the ship's officers, and keep the non-engineering areas in good condition. They stand watch, looking out for other vessels and obstructions in the ship's path, and aids to navigation. They also steer the ship, measure water depth in shallow water, and maintain and operate deck equipment such as life boats, anchors, and cargo-handling gear. When docking or departing, they handle lines. They also perform routine maintenance chores such as repairing lines, chipping rust, and painting and cleaning decks or other areas. Seamen may also load and unload cargo, if necessary. On vessels handling liquid cargo, they hook up hoses, operate pumps, and clean tanks. Deckhands on tugboats or tow vessels tie barges together into tow units, inspect them periodically, and disconnect them when the destination is reached. Larger vessels usually have a boatswain or head seaman. Qualified members of the engine department, or QMED's, work in the engine spaces below decks under the direction of the ship's engineers. They lubricate gears, shafts, bearings, and other moving parts of engines and motors, read pressure and temperature gauges and record data, and may assist with repair and adjust machinery. A typical deep sea merchant ship has a captain, three deck officers or mates, a chief engineer and three assistant engineers, plus six or more seamen and QMED's. The size and service of the ship determines the number of crew for a particular voyage. Small vessels operating in harbors, rivers, or along the coast may have a crew comprised only of a captain and one deckhand. The cooking responsibilities usually fall under the deckhands duties. On larger ships, the crew may be as large as a captain, a mate or pilot, an engineer, and seven or eight seamen. Non-licensed positions on a large ship may include a full time cook, an electrician, machinery mechanics, and a radio officer. Pilots guide ships in and out of harbors, through straits, and on rivers and other confined waterways where a familiarity with local water depths, winds, tides, currents, and hazards such as reefs and shoals are of prime importance. Pilots on river and canal vessels are usually regular crew members, like mates. Harbor pilots are generally independent contractors, who accompany vessels while they enter or leave port. They may pilot many ships in a single day. Getting the Job & Other Information Information on merchant marine careers, training, and licensing requirements is available from: Maritime Administration, U.S. Department of Transportation, 400 7th St. SW., Room 302, Washington, DC 20590.   U.S. Coast Guard, Licensing and Manning Compliance Division (C-MOC-1), 2100 2nd St. SW., Washington, DC 20593-0001. Individuals interested in attending a merchant marine academy should contact: Admissions Office, U.S. Merchant Marine Academy, Steamboat Rd., Kings Point, NY 11024. References Note: The references below (and/or on other parts of this page) will link to pages on the internet outside the Career Video system. Related Occupations: Workers in occupations having duties and responsibilities similar to these occupations include fishing vessel captains, ferryboat operators, and long shoremen. Training: California State Training Inventory © State of California EDD/LMID, US Department of Labor Unless indicated otherwise, wage data is based on Statewide aggregated CCOIS survey responses between 1995 and 1997. Questions or Comments? Contact us.